Owner proposalGuest servicesAsk AI about Rad Stayoperations@rad-stay.com1-877-723-7829
1-877-723-7829 Get a proposalProposal
Owner guide · Operations

Running Several Units in One Building

Four rentals in one building share a supply closet, a cleaning route and a trash area, and they also share every leak, power cut and noisy Saturday. Our own flagship, Union Street Lofts, is a set of four upstairs lofts on Union Street downtown, so this is the setup we know best. This guide covers what changes when units stack up under one roof, from Metro's per-unit rules to the calendar, turnover and building routines, with sources read on November 12, 2026.

Key facts
Permits
One per unit; Metro has no building-wide permit
Percentage cap on STR units in a building
None in Metro's code
Inspection for 3+ dwellings
Nashville Fire Marshal's Office
Guests per unit
Bedrooms times two, plus four, 12 at most
Example
Union Street Lofts, Units 201-204, four permits issued April 5, 2023
Airbnb co-hosts
Up to 10 per listing
On this page
  1. Each unit stands alone under Metro's rules
  2. Apply for the units together
  3. Renewal dates across the building
  4. Separate listings, one calendar view
  5. Turnovers on a shared schedule
  6. Door codes and access
  7. Capacity across the building
  8. The right permit number on each listing
  9. Team access on the platforms
  10. Trash and recycling in a multi-unit building
  11. Noise when the neighbors are upstairs
  12. When the building itself fails
  13. Fire safety across the building
  14. Insurance and the HOA in a shared building
  15. Questions
  16. Sources

Each unit stands alone under Metro's rules

Metro has no single permit for a building. Each dwelling unit that takes short-term guests holds its own permit, covers four bedrooms at most, and carries its own guest limit, posted inside that unit. Nothing in the code limits what share of a building's apartments can be permitted; the practical ceiling comes from zoning, from Metro's distance test and from whatever the condo or HOA papers say.

The one-party rule works unit by unit. Metro forbids two separate contracts for the same unit on overlapping nights, so each loft goes to one booking. When one group wants several units, each unit still has its own booking, guest count and responsible-party notice. Ask Metro Codes how it views a single group spread across several units before you advertise that way.

Apply for the units together

Union Street Lofts shows why batching helps. Metro's open data lists all four of its not-owner-occupied permits as entered on March 28, 2023 and issued on April 5, 2023, and all four now carry the same expiration date. One application cycle produced one renewal date for the whole building.

Batching also matters for the distance rule. Where a building sits near enough to a park, a school, a church or a child care center to need a Council waiver, one resolution and one hearing can cover several units of a single multifamily development. Neighbor letters go to the owners of adjacent property, which Metro defines to include the units above and below.

Renewal dates across the building

Each permit runs 365 days from issue, and Metro Codes sends automatic renewal emails 60 days ahead and a second one 45 days ahead. Units permitted on different dates mean several renewals a year, each with its own insurance certificate, tax-status proof and fee.

Keep a single sheet listing each unit's permit number, expiration date, insurance policy and renewal status. Renew all of them in the same week when the dates line up, and put the earliest date in two people's calendars.

Separate listings, one calendar view

The plain approach is one listing per unit, each with its own photos, bed list and guest maximum. Airbnb also offers a multiple-units property format in which each apartment keeps its own title, availability, maximum guests, rules and calendar under a shared property page.

When the same units also appear on Vrbo or a direct booking site, software that links every channel keeps the calendars matched and puts every unit's arrivals and departures on one screen. Name each unit the same way on the door, the listing, the cleaning schedule and the lock software, so nobody preps 203 for the guests booked into 204.

Turnovers on a shared schedule

Expect several units in one building to turn on the same day, above all after a big weekend. If the crew is small, give each unit a slightly different checkout and arrival hour, and use Airbnb's preparation-time setting to block a night only where a unit needs deep cleaning or repairs.

Store linens, consumables and spare parts in one locked closet with a par level per unit. A single stock count after each weekend tells you what to reorder for the whole building instead of four separate runs.

Door codes and access

Give each unit its own lock and a fresh code for every stay, so one forwarded message never opens more than one door. If the building has a street door, keep its code separate and change it on a schedule.

Under Airbnb's updated host rules, which start with trips booked November 20, 2026, an app-based lock that needs a guest account is fine so long as you can hand over a code or key to any guest who would sooner not download it. A keypad on each unit door is the simplest second route.

Capacity across the building

Metro's guest formula applies per unit, so a building's capacity is the sum of its units. A building of four two-bedroom units could sleep eight apiece under the formula, 32 in all, while a three-bedroom unit tops out at ten and no unit can go past 12 however many bedrooms it has.

Write each unit's limit on its own listing and post it inside its own door. A group that books three units books three separate limits, so a fourth friend who arrives late has to fit inside one of them or stay elsewhere.

The right permit number on each listing

Under Metro's checklist, each ad must display the permit number for that specific unit, or a picture of its permit. In a building where units are photographed alike and listed side by side, it is easy to paste 202's number into 203's listing.

Check each listing against the permit sheet whenever a listing is copied, a channel is added or a permit is renewed. Every listing should trace back to the permit for the door it describes.

Team access on the platforms

Airbnb lets a listing carry up to 10 co-hosts, which suits a small team covering several units: the cleaner lead, the maintenance contact and the person answering messages can each see what they need. Agree in writing what each co-host handles, and remove access the day someone leaves.

Metro also wants a named responsible party, resident within 25 miles, on call through the night for each booking. Metro's posted rules do not bar one person from serving as that contact for several units, and each unit still posts the contact's name and number inside.

Trash and recycling in a multi-unit building

Metro's cart pickup stops at buildings of four homes or fewer inside the Urban Services District. Larger multifamily complexes, and anything in the General Services District, arrange their own collection, usually through a hired hauler, and Metro will provide dumpster service for Urban Services District complexes if the owner asks.

Four units turning on one morning can overflow a shared container. Size the service for the busiest weekend, put the collection day in the cleaners' checklist, and tell guests where bags go. Metro's operation rules hold occupants to the city's waste provisions.

Noise when the neighbors are upstairs

Under Metro's operation rules, guests must stay within the city's noise ordinance, and their behavior is the permit holder's responsibility. A third violation exposes that unit's permit to revocation.

Put quiet hours in each listing's house rules, keep occupancy at the posted limit, and answer a neighbor's call faster than a guest's. Our noise rules page covers the Metro limits in detail.

When the building itself fails

A burst pipe, a power cut, a dead elevator or a jammed street door hits every unit at once. Keep one building sheet with the water and gas shutoffs, the electrical panel locations, the elevator and alarm contractors, and the plumber and locksmith who answer at night, and make sure the responsible party can reach it from a phone.

When a shared system fails, message every affected guest at the same time with what happened and what comes next. Airbnb's damage program reimburses some harm guests cause if you file inside two weeks of their departure; it excludes acts of nature, so check what your own property policy covers for a building failure before you need it.

Fire safety across the building

Once a structure has a third dwelling, or where the unit door opens onto an interior hall, the permit can't be finished until the Fire Marshal's Office has inspected. Smoke alarms go in every sleeping area, along the path to the exit and on every level.

In a building, the common areas serve every guest, so they matter as much as the units. Keep the alarm contractor's inspection records with the permit file for each unit, and check the alarms in all units on the same day each quarter.

Insurance and the HOA in a shared building

Each unit's file needs its own insurance proof covering fire, hazard and liability, and the liability limit must reach $1 million per occurrence. Every application, condo or not, also carries your statement that nightly renting violates no association or condo document, while Metro's FAQ points out that an HOA can impose tighter limits than the city does.

Read the master deed and bylaws before you buy or convert a unit in someone else's building. Where you hold title to every unit, keep the house rules for the common areas consistent across every listing.

Questions

Do I need a separate permit for each unit?

Yes. Permits are issued unit by unit, four bedrooms at most apiece; Metro has nothing that covers a whole building. No rule caps what fraction of the units can be permitted.

Can a large group book several units in one building?

Each unit takes one party under one booking, with its own guest limit. Before marketing the building to big groups, get Metro Codes' view on one group spread over several units.

Can one person be the responsible party for every unit?

Metro's contact person has to live inside a 25-mile circle and stay reachable overnight from arrival to checkout. Metro's posted rules do not bar one person from covering several units, but each unit must post that person's name and number.

Will the Fire Marshal inspect our building?

Metro requires the Fire Marshal's Office to inspect permitted units wherever a structure contains three dwellings or more. The inspection is requested after the permit application is filed.

Who picks up trash at a building with more than four units?

Metro's carts serve buildings of up to four units in the Urban Services District. Bigger complexes hire their own hauler, though Metro will run dumpster pickup in the Urban Services District on request.

To keep this page, print it or choose Save as PDF in your browser's print window. The printout keeps the sources and the date.

More owner guides

All 41